Introducing COSM Bass Technology
Building upon the knowledge and experience gained from V-Guitar technology, Roland developed all-new COSM Bass technology to power the new V-Bass. COSM Bass technology can process a standard bass guitar with a GK-2B Divided Pickup to sound like a variety of other basses—including acoustic upright bass, fretless bass, a variety of classic electric basses, synth bass and more—and you can even design custom basses by combining different body types and pickup configurations. Of special note is the polyphonic pitch shifting, which can re-pitch individual strings for instant alternate tunings and wild sound effects.
Unsurpassed Bass Amp Modeling and Bass Effects
As a recording and performance tool, the V-Bass stands alone. Thanks to COSM Bass Amp Modeling, the V-Bass can precisely model the sound of classic and modern bass amps, from “Concert” and “Session” models to “Trace”, “Bass 360” and others. Dial in the tone of these models like the originals, then pair them with a variety of modeled speaker cabinets. The effects section features wah, modeled overdrive/ distortion, compressors, extensive EQ, delay, chorus and reverb.
Bass-Friendly Design
The V-Bass was designed by bassists, for bassists. So it features things like an XLR output for connection to PA or studio console, a 4-, 5- or 6-string Select function for accurate detection of string spacing, and a direct 1/4-inch input for access to the COSM Bass Amp Modeling and effects sections using a standard bass guitar output.
The GK-2B Divided Pickup for Bass
The new GK-2B Divided Pickup for Bass is the first bass pickup which sends an individual output for each string of a 4-, 5- or 6-string bass. This allows devices like the V-Bass to process each string individually, resulting in stunning bass guitar models, polyphonic pitch-shifting and much more. The GK-2B can be easily user-installed on standard electric basses.
- AD Conversion
- 24-bit + AF method* (BASS INPUT), 20-bit (GK INPUT)
- DA Conversion
- 20-bit 128 oversampling
- Sampling Frequency
- 44.1 kHz
- Program Memories
- 200: 100 (User) + 100 (Preset)
- Nominal Input Level
- -10 dBu
- Input Impedance
- 1 M ohms
- Nominal Output Level
- OUTPUT: +4 dBu, OUTPUT (XLR): +4 dBu (BALANCED), BASS OUTPUT: -10 dBu
- Output Impedance
- OUTPUT: 2 k ohms, OUTPUT XLR: 600 ohms 2Pin (HOT) - 3Pin (COLD), 300 ohms 2Pin (HOT) - 1Pin (GND), 300 ohms 3Pin (COLD) - 1Pin (GND), BASS OUTPUT: 2 k ohms
- Dynamic Range
- 100 dB or greater (IHF-A)
- Display
- Full-graphic LCD (160 x 64) with backlit
8 segment, two-digit LED - Connectors
- GK INPUT, BASS INPUT, BASS OUTPUT, OUTPUT L (MONO), OUTPUT R, OUTPUT (XLR) L/ (MONO), OUTPUT (XLR) R/DIRECT, PHONES, SUB EXP PEDAL/SUB CTL1, 2, MIDI IN, MIDI OUT
- Power Consumption
- 24 W (AC 117V, 230V, 240V)
- Accessory
- GK Connecting Cable C13-A (5m)
- Option
- Divided Pickup: GK-3B, Expression Pedal: EV-5, Footswitch (Unlatch): FS-5U (BOSS), Footswitch (Latch): FS-5L (BOSS), Pedal Switch: DP-2
- Size and Weight
- Width
- 504 mm
- 19-7/8 inches
- Depth
- 303 mm
- 11-15/16 inches
- Height
- 101 mm
- 4 inches
- Weight
- 4.9 kg
- 10 lbs. 13 oz.
- * 0 dBu = 0.775 Vrms. * AF Method (Adaptive Focus method) This is a proprietary method from Roland that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters.
- *The specifications are subject to change without notice.
- GK-3B Divided Bass PickupDivided pickup offering possibility of GK-devices to bassists. View Product
- GKC-5/-10 13-Pin CablesSpecial cable to connect GK-compatible guitar gear. View Product
- DP-2 Damper PedalMomentary footswitch for use with keyboards and recording products. View Product
- US-20 Unit SelectorFloor pedal unit to control and switch between two GK-compatible devices. View Product
- FS-5U/FS-5L Foot SwitchDurable metal footswitch available in latching and unlatching types.*Some products are compatible with either FS-5U or FS-5L only. Please check the specs to confirm the suitable model. View Product
- FS-6 Dual FootswitchTwo switches in one, BOSS’s FS-6 combines latch- and momentary-type switching into one unit. View Product
Downloads
Brochures & Catalogs
-
V-Bass, Full Brochure
-
V-Bass Brochure Page 1
-
V-Bass Brochure Page 2
Support
If you have questions about operating your Roland product, please check our Knowledge Base for answers to the most common questions.
You can also contact our Product Support through Roland Backstage.
In addition, we have a library of Owner’s Manuals and Support Documents that you can download and reference.
Owner’s Manuals
-
Owner's Manual
-
MIDI Implementation
-
Patch/Performance List
Support Documents
-
V-Bass TurboStart